RC planes - Aerosquare

aerosquare header 2012

Beaver DHC2

A sheet of depron foam and some bits of balsa.
You shouldn't need much more than that to build this half scale model of the legendary Beaver DHC2.
A simple geared Speed 400 is enough to fly it. You can also decide to install a small brushless to have even better performances than with the Speed 400 motor.
It's an easy to build model and it has very good flight characteristics. That's a perfect plane for a beginner or for relaxed flight on a Sunday.

Sandy's Beaver project

Details

sandy_beaver_01_s.jpg The little depron DHC2 Beaver project is still succesful. Sandy is presenting here his construction project.
That's a nice work.

 


"It will have Flaps, Ailerons, rudder and elevator using 6 servo's and 6 channel radio, GWS "middle" brushless motor and 3 cell li-po driving a GWS 10inch prop. It should sit nicely on the GWS floats, but I might build up some scale floats."
Sandy, please don't forget to send some pics of the maiden flight.

sandy_beaver_02_s.jpg

 

 

sandy_beaver_03_s.jpg