Construction files
If you wish to build a machine like mine, I provide the drawings and plans free of charge.
Carefully study ALL the documents before starting to build. This
machine works pretty well. But there is a lot of room for improvement!
By the way if I build a new version, I will probably modify some parts!
Note: The X axis carriages have been modified to improve stability. The
modification is not shown on the 2D drawings. Please refer to the 3D
files and the photos to see the modification.
And If you build a machine using those plans, I'd be very happy to see
what you've done. A photo of you machine will always be welcome!
DISCLAIMER
These
documents are made available free of charge for hobby and private use
only. I do not guarantee anything and I am not responsible for any
possible mistake that might be found in these documents, or injury,
problems, losses, that could result from the use of a machine built
using those plans.
YOU USE THOSE PLANS AT YOUR OWN RISK!
The usage must be exclusively private. All commersial usage is strictly forbidden without my express consent.
A few improvments you can add:
A light to properly position the milling cutter.
Cooling fan on the spindle head.
Emergency stop.
?...
|
CNC cutting 
